| ||
Brother DCP7060D Trouble Error Codes
|
Code
|
Description
|
Causes
|
0F
|
The back cover is open upon duplex-printing. (The back cover sensor is OFF)
|
1 Harness connection failure of paper eject sensor PCB ASSY. 2 The member part to press the back cover sensor which is located at the inner side of the back cover is broken. 3 The member part to press the back cover sensor which is located at the duplex tray is broken. 4 Back cover sensor failure. 5 Main PCB failure
|
1E
|
The drum unit will reach the end of life soon.
|
1 Main PCB failure
|
24
|
Internal temperature sensor error.
|
1 Harness connection failure of internal temperature sensor. 2 Internal temperature sensor failure. 3 Main PCB failure
|
36
|
Error in the high voltage power suply PCB while the machine is in the standby mode.
|
1 Main PCB failure
|
3B
|
Main PCB DRAM access error.
|
1 Main PCB failure
|
44
|
The toner cartridge is not installed.
|
1 Dirt on the electrode of the drum unit and on the machine. 2 Harness connection failure of high voltage power supply PCB. 3 High voltage power supply PCB failure. 4 Main PCB failure
|
50
|
Drum unit is at the end of life. (Continue printing)
|
1 Main PCB failure
|
56
|
The fuser cover is open.
|
1 Paper eject actuator catching on some position. 2 Paper eject sensor PCB failure. 3 Main PCB failure
|
57
|
Paper is jammed in the duplex paper feed path.
|
1 Foreign object around duplex tray. 2 Duplex tray failure. 3 DX gears damaged
|
58
|
Fuser unit error. (Some kind of fixing error occurs) (Warning)
|
1 Any fuser error occurs when started in the ready state.
|
59
|
Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.)
|
1 Harness connection failure between fuser unit connector and paper eject sensor PCB ASSY. 2 Harness connection failure between fuser unit connector and low voltage power supply PCB ASSY. 3 Harness connection failure between paper eject sensor PCB and main PCB. 4 Paper eject sensor PCB failure. 5 Low voltage power supply PCB failure. 6 Main PCB failure. 7 Fuser unit failure.
|
63
|
The toner cartridge is at the end of life.
|
1 New toner actuator catching on some position. 2 Harness connection failure of new toner sensor PCB. 3 New toner sensor PCB failure. 4 Main PCB failure
|
67
|
The toner cartridge will reach the end of life.
|
1 New toner actuator catching on some position. 2 Harness connection failure of new toner sensor PCB. 3 New toner sensor PCB failure. 4 Main PCB failure
|
6A
|
Fuser unit error. (The center thermistor does not detect 60°C within in the specified time.)
|
1 Fuser unit connector connection failure. 2 Fuser unit failure. 3 Low voltage power supply PCB failure. 4 Paper eject sensor PCB failure. 5 Main PCB failure
|
6B
|
Fuser unit error. (The center thermistor does not detect 100°C within in the specified time.)
|
1 Fuser unit connector connection failure. 2 Fuser unit failure. 3 Low voltage power supply PCB failure. 4 Paper eject sensor PCB failure. 5 Main PCB failure
|
Code
|
Description
|
Causes
|
6C
|
Fuser unit error. (The center thermistor detects 270°C or higher temperature for 1 second.)
|
1 Fuser unit connector connection failure. 2 Fuser unit failure. 3 Low voltage power supply PCB failure. 4 Paper eject sensor PCB failure. 5 Main PCB failure
|
6D
|
Fuser unit error. (The center thermistor detects 60°C or lower temperature for 1 second during standby or printing.)
|
1 Fuser unit connector connection failure. 2 Fuser unit failure. 3 Low voltage power supply PCB failure. 4 Paper eject sensor PCB failure. 5 Main PCB failure
|
6F
|
Fuser unit error. (The center and side thermistors detect extremely high temperature.) (Detection of hardware)
|
1 Fuser unit connector connection failure. 2 Fuser unit failure. 3 Low voltage power supply PCB failure. 4 Paper eject sensor PCB failure. 5 Main PCB failure
|
71
|
Laser unit error.
|
1 Correction value error of laser unit. 2 Harness connection failure of laser unit. 3 Main PCB failure. 4 Laser unit failure
|
72
|
Beam detecting sensor error of the laser unit.
|
1 Correction value error of laser unit. 2 Harness connection failure of laser unit. 3 Main PCB failure. 4 Laser unit failure
|
74
|
An unidentified error occurred.
|
1 Main PCB failure
|
75
|
Cooling down the inside of the machine to protect it.
|
1 Internal temperature sensor failure. 2 Main PCB failure
|
76
|
Fuser unit error. (The center thermistor detects the sharp temperature rise.)
|
1 Fuser unit failure. 2 Low voltage power supply PCB failure. 3 Paper eject sensor PCB failure. 4 Main PCB failure
|
78
|
Fuser unit error. (The center thermistor detects the sharp temperature fall.)
|
1 Fuser unit failure. 2 Low voltage power supply PCB failure. 3 Paper eject sensor PCB failure. 4 Main PCB failure
|
7A
|
A lock signal of the main motor cannot be detected.
|
1 Flat cable connection failure of main motor. 2 Main motor failure. 3 Low voltage power supply PCB failure. 4 Main PCB failure
|
7B
|
An unidentified error occurred.
| |
7C
|
An unidentified error occurred.
| |
7D
|
Dirt on drum unit.
|
1 Dirt on the electrode of the drum unit and on the machine. 2 High voltage power supply PCB failure. 3 Main PCB failure
|
7E
|
An unidentified error occurred.
| |
7F
|
FAX paper size is incorrect. (Menu setting)
|
1 Main PCB failure
|
Code
|
Description
|
Causes
|
80
|
FAX paper size is incorrect. (The actually loaded paper is small)
|
1 Main PCB failure
|
83
|
Drum unit error (An drum error occurred after the drum unit reached the end of life.)
|
1 Main PCB failure
|
84
|
Paper jam at the rear section of the machine.
|
1 Foreign object in the feed system at the rear section of the machine. 2 Paper eject actuator assembling failure. 3 Paper eject sensor PCB failure. 4 Main PCB failure
|
88
|
Paper jam inside the machine.
|
1 Harness connection failure of paper eject sensor PCB ASSY. 2 Paper eject actuator catching on some position. 3 Paper eject sensor PCB failure. 4 Fuser unit gear damaged. 5 Main PCB failure
|
89
|
Paper of the size not supported for duplex printing is set in the tray.
|
1 Main PCB failure
|
8A
|
Paper jam in the paper tray1.
|
1 Paper edge actuator catching on some position. 2 Registration front actuator catching on some position. 3 Harness connection failure of registration front/rear sensor PCB ASSY. 4 Paper feeding kit worn out. 5 High voltage power supply PCB failure. 6 Registration front/rear sensor PCB failure.
|
8D
|
Paper jam occurred around the back cover at the time when the power was turned ON, or the back cover is open.
|
1 Paper eject actuator catching on some position. 2 Paper eject sensor PCB failure. 3 Main PCB failure
|
9A
|
Not detect paper at feeding from manual feed slot.
|
1 Harness connection failure of registration front/rear sensor PCB ASSY. 2 High voltage power supply PCB failure. 3 Main PCB failure. 4 Registration front sensor failure
|
9B
|
Life of toner cartridge
|
1 Main PCB failure
|
9C
|
Life of toner cartridge (Continue mode)
|
1 New toner actuator catching on some position. 2 Harness connection failure of new toner sensor PCB. 3 New toner sensor PCB failure. 4 Main PCB failure
|
A1
|
The front cover is open.
|
1 Harness connection failure of high voltage power supply PCB ASSY (Front cover sensor is mounted in high voltage power supply PCB ASSY.) 2 Part pressing the front cover sensor is broken, which is provided at inside of front cover. 3 Front cover sensor failure. 4 Main PCB failure.
|
A2
|
During scanning, 90cm or longer of a document is detected.
|
1 Document scanning position detection actuator catching on some position. 2 Document scanning position sensor PCB failure. 3 Main PCB failure.
|
A3
|
Document scanning position detection sensor does not detect the leading edge of a document although the document is fed farther than designated distance.
|
1 Document scanning position detection actuator catching on some position. 2 Document scanning position detection sensor PCB failure. 3 Main PCB failure
|
A4
|
ADF cover is open.
|
1 Coming off of document detection actuator/ADF cover open actuator. 2 Harness connection failure of document detection sensor/ADF cover open sensor PCB. 3 Deformation and/or breakage of ADF cover. 4 ADF cover open sensor failure. 5 Main PCB failure
|
A5
|
Scanning failure upon FAX transmission. (Scanning unit failure for the first time)
|
1 White level data failure. 2 Document scanner unit failure. 3 Main PCB failure
|
Code
|
Description
|
Causes
|
A6
|
Scanning failure upon FAX transmission. (Scanning unit failure for the second time or later)
|
1 White level data failure. 2 Document scanner unit failure. 3 Main PCB failure
|
A7
|
Scanning color parameter fille failure.
|
1 White level data failure. 2 Document scanner unit failure. 3 Main PCB failure
|
A8
|
Scanning color parameter error for recording the image.
|
1 White level data failure. 2 Document scanner unit failure. 3 Main PCB failure
|
AD
|
Timeout error during waiting for completion of scanning DMA transfer.
|
1 Document scanner unit failure. 2 Main PCB failure.
|
AF
|
The white tape cannot be detected.
|
1 White level data failure. 2 Harness connection failure of document scanner unit. 3 Harness connection failure of FB motor harness. 4 Document scanner unit failure. 5 Main PCB failure
|
B0
|
Scanning flat cable connection failure.
|
1 Incomplete insertion of the harness of the document scanner unit. 2 Document scanner unit failure. 3 Main PCB failure
|
B1
|
Dark level offset data level error for scanning.
|
1 Document scanner unit failure. 2 Main PCB failure
|
B2
|
Gain control data level error for scanning.
|
1 Document scanner unit failure. 2 Main PCB failure
|
B3
|
The scanning area setting left edge detection error. (white tape)
|
1 Document scanner unit failure. 2 Main PCB failure
|
B4
|
The scanning area setting right edge detection error. (white tape)
|
1 Document scanner unit failure. 2 Main PCB failure
|
B7
|
A/D converter standard voltage failure; at High side.
|
1 Document scanner unit failure. 2 Main PCB failure
|
B8
|
A/D converter standard voltage failure; at Low side.
|
1 Document scanner unit failure. 2 Main PCB failure
|
B9
|
Scanning light adjustment error.
|
1 Document scanner unit failure. 2 Main PCB failure
|
BB
|
White level data error.
|
1 White level data failure. 2 Document scanner unit failure. 3 Main PCB failure
|
BD
|
Black level data error.
|
1 Document scanner unit failure. 2 Main PCB failure
|
Code
|
Description
|
Causes
|
C0
|
Failure to detect a new toner cartridge.
|
1 Power off or front cover opened while detecting a new toner cartridge.
|
C7
|
Insufficient memory.
|
1 Main PCB failure
|
C8
|
RAM area for secure data full.
|
1 Main PCB failure
|
D1
|
Modem initialization failed.
|
1 Main PCB failure
|
DD
|
Fuser unit error except error codes 6A, 6B, 6C, 6D, 6F, 76, 78, DE and E2.
|
1 Harness connection failure between fuser unit connector and paper eject sensor PCB ASSY. 2 Harness connection failure between fuser unit connector and low voltage power supply PCB ASSY. 3 Harness connection failure between paper eject sensor PCB and main PCB. 4 Paper eject sensor PCB failure. 5 Low voltage power supply PCB failure. 6 Main PCB failure. 7 Fuser unit failure
|
DE
|
When the center thermistor is higher than the idle temperature, it is detected that the side thermistor temperature is lower than 60°C.
|
1 Harness connection failure between paper eject sensor PCB ASSY and fuser unit. 2 Side thermistor or center thermistor failure. 3 Paper eject sensor PCB failure. 4 Main PCB failure
|
E0
|
Program error. (An error occurred in the ROM checksum.)
|
1 Firmware update failure. 2 Main PCB failure.
|
E2
|
When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C.
|
1 Heat roller dirty. 2 Harness connection failure between paper eject sensor PCB ASSY and fuser unit. 3 Side thermistor or center thermistor failure. 4 Paper eject sensor PCB failure. 5 Main PCB failure
|
E6
|
Write error in EEPROM of the main PCB.
|
1 Main PCB failure
|
EC
|
Main fan error.
|
1 Harness connection failure of main fan. 2 Main fan failure. 3 High voltage power supply PCB failure. 4 Main PCB failure
|
ED
|
Communication with the wireless LAN PCB cannot be established upon startup of the power supply.
|
1 Harness connection failure of wireless LAN PCB. 2 Wireless LAN PCB failure. 3 High voltage power supply PCB failure. 4 Main PCB failure
|
EE
|
Unavailability of communication after connecting to the wireless LAN PCB is detected.
|
1 Harness connection failure of wireless LAN PCB. 2 Wireless LAN PCB failure. 3 High voltage power supply PCB failure. 4 Main PCB failure
|
EF
|
The supplied power is unstable.
|
1 The irregular power supply is detected. 2 Main PCB failure
|
F0
|
USB flash memory does not work properly
|
1 Malfunction of firmware. 2 Main PCB failure
|
F9
|
The country code is not entered properly.
|
1 Power turned OFF while the function code 74 is being executed and PARAMETER INTI is being displayed
|
Brother Trouble Error Codes
DOWNLOAD SUMSUNG, LAPTOP DRIVERS.laptopdriver.com, download.com
Download Laptop,download drivers, download laptop Drivers,ALL LAPTOP DRIVER. DELL DRIVERS, HP DRIVERS, TOSHIBA DRIVERS, ACER DRIVERS , LENOVO DRIVERS , SONY DRIVERS, SUMSUNG DRIVERS, ASUS DRIVERS,Acer Drivers, Mutoh Drivers,Apple Drivers,OCE Drivers, Download HP Drivers,Brother Drivers,OKI Drivers,Canon Drivers Olivetti Drivers,Duplo Drivers,Download DELL laptop DRIVERS,Panasonic Drivers,Encad-Kodak Drivers,DELL LAPTOP DRIVERS, Printronix Drivers,Epson Drivers,Download ASUS DRIVERS, Ricoh Drivers,HP Drivers,Riso Drivers,KIP Drivers,Konica Drivers,DOWNLOAD SONY LAPTOP DRIVERS ,Samsung Drivers,Konica-Minolta Drivers,Download Canon Drivers ,Sanyo Drivers,Kyocera-Mita Drivers,Sharp Drivers,Lexmark Drivers,Sony Laptop Drivers,LG Drivers,Star ,Download Sony Laptop Drivers,
Download SONY LAPTOP DRIVERS,
DELL DRIVERS,
Download DELL DRIVERS
download laptop Drivers
Drivers,Mimaki Drivers,Toshiba Drivers,Minolta Drivers,Various Drivers,Muratec Drivers,Zebra Drivers,
DOWNLOAD ASUS LAPTOP DRIVERS,
DOWNLOAD SUMSUNG LAPTOP DRIVERS,
DOWNLOAD DELL LAPTOP DRIVERS,
Download Canon Copy Machine Drivers
Brother Trouble Error Codes
Download Service Manual,Error Codes,
Download Laptop,download drivers, download laptop Drivers,ALL LAPTOP DRIVER. DELL DRIVERS, HP DRIVERS, TOSHIBA DRIVERS, ACER DRIVERS , LENOVO DRIVERS , SONY DRIVERS, SUMSUNG DRIVERS, ASUS DRIVERS,Acer Drivers, Mutoh Drivers,Apple Drivers,OCE Drivers,Brother Drivers,OKI Drivers,Canon Drivers Olivetti Drivers,Duplo Drivers,Panasonic Drivers,Encad-Kodak Drivers,Printronix Drivers,Epson Drivers,Ricoh Drivers,HP Drivers,Riso Drivers,KIP Drivers,Konica Drivers,Samsung Drivers,Konica-Minolta Drivers,Sanyo Drivers,Kyocera-Mita Drivers,Sharp Drivers,Lexmark Drivers,Sony Drivers,LG Drivers,Star ',
Brother DCP7060D Trouble Error Codes
A Note S37SP Drivers for Windows XP & Vist,
Drivers,Mimaki Drivers,Toshiba Drivers,Minolta Drivers,Various Drivers,Muratec Drivers,Zebra Drivers
No comments:
Post a Comment