Wednesday 31 May 2017

Brother DCP8080DN Trouble Error Codes



Brother DCP8080DN Trouble Error Codes
Brother DCP8080DN Trouble Error Codes

Brother DCP8080DN Trouble Error Codes

Code
Description
Causes
1E
The drum unit reached its life and requires replacement.
Replace the drum unit with a new one.
1F
Two or more optional trays are installed
1 Connector: 54702-1219 failure. 2 Main PCB failure
24
Internal temperature sensor failure
1 Harness connection failure of internal temperature sensor. 2 Internal temperature sensor failure. 3 Main PCB failure
35
EEPROM of main PCB failure
1 Main PCB failure
36
HVPS PCB during standby failure
1 HVPS PCB unit failure. 2 Main PCB failure
3B
Main PCB RAM failure
1 Main PCB failure
3C
EEPROM writing error (Not applicable)
1 Main PCB failure
3D
EEPROM reading error (Not applicable)
1 Main PCB failure
3E
EEPROM bus error (Not applicable)
1 Main PCB failure
44
No toner cartridge
1 Dirt on electrodes on toner cartridge and machine body. 2 HVPS PCB unit failure. 3 Main PCB failure
50
The drum unit reached its life and requires replacement.
Replace the drum unit with a new one.
51
The paper feed kit MP reached its life and requires replacement.
1 Replacement time of the paper feed kit MP.
52
The paper feed kit T1 reached its life and requires replacement.
1 Replacement time of the paper feed kit T1.
53
The paper feed kit T2 reached its life and requires replacement.
1 Replacement time of the paper feed kit T2.
54
The fuser unit reached its life and requires replacement.
1 Replacement time of the fuser unit

Code
Description
Causes
55
The laser unit reached its life and requires replacement.
1 Replacement time of the laser unit
56
Back cover is opened
1 Harness connection failure of relay rear PCB ASSY. 2 Relay rear PCB ASSY failure. 3 Main PCB failure
57
Paper jam (Duplex tray)
1 Duplex feed ASSY failure. 2 Main PCB failure. 3 Plate gear damaged.
58
Fuser unit failure
1 Fuser unit failure. 2 Main PCB failure.
59
Fuser unit failure (Detect fuser failure at start-up)
1 Fuser unit failure. 2 Main PCB failure.
63
Toner life end
1 Relay front PCB ASSY failure. 2 Main PCB failure
67
Toner low
1 Toner sensor PCB ASSY failure. 2 Main PCB failure
68
Temperature rise when heater is off
1 Fuser unit failure. 2 Main PCB failure
69
Mis-connect center thermistor connector
1 Harness connection failure of fuser unit. 2 Harness connection failure of relay rear PCB ASSY. 3 Fuser unit failure. 4 Main PCB failure
6A
Fuser temperature does not reach 60°C within the specified time (center thermistor)
1 Fuser unit failure. 2 Main PCB failure.
6B
Fuser temperature does not reach 100°C within the specified time (center thermistor)
1 Fuser unit failure. 2 Main PCB failure.
6C
Fuser temperature exceeds its higher limit (center thermistor)
1 Fuser unit failure. 2 Main PCB failure.
6D
Fuser temperature exceeds its lower limit (center thermistor)
1 Fuser unit failure. 2 Main PCB failure.
6E
Fuser temperature does not rise (center thermistor)
1 Fuser unit failure. 2 Main PCB failure.
6F
Hardware detects extremely high temperature of the center or side thermistors
1 Fuser unit failure. 2 Main PCB failure.

Code
Description
Causes
70
Fuser motor error
1 Motor failure. 2 Main PCB failure.
71
Laser unit polygon motor failure
1 Laser unit failure. 2 Main PCB failure.
72
Laser beam emission failure
1 Laser unit failure. 2 Main PCB failure.
75
Sensor of the inside temperature for detection detected higher than normal temperature
1 Thermistor ASSY failure. 2 Main PCB failure.
76
Rapid temperature rising failure (center thermistor)
1 Fuser unit failure. 2 Main PCB failure.
78
Rapid temperature falling failure (center thermistor)
1 Fuser unit failure. 2 Main PCB failure.
7A
No detection of main motor synchronous signal
1 Motor failure. 2 Main PCB failure.
7D
Dirt on corona wire (detect discharge error)
1 Dirt or dust on drum unit electrodes. 2 Charge HVPS PCB failure. 3 Main PCB failure
7F
Fax paper setting mismatch (The setting paper becomes besides the A4/Letter/Legal/ Folio) (Not applicable)
1 Registration front actuator 2 catching on some position. 2 Main PCB failure
80
Fax paper size is incorrect (The paper is smaller 10mm than the letter size (11inch) in Fax List/ Report)
1 Registration front actuator 2 catching on some position. 2 Main PCB failure
83
Failure of discharge detection (Printing becomes unable until the drum is replaced with a new one.) (Discharge detection becomes unable until the drum counter reaches the double of the drum life.)
1 Main PCB failure.
84
Paper jam
1 Harness connection failure of relay rear PCB ASSY. 2 Eject actuator catching on some position. 3 Paper eject sensor PCB failure. 4 Main PCB failure
85
Tray 1 is not installed into the machine
1 T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB failure. 2 Harness connection failure of T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB. 3 Main PCB failure. 4 Connector 55533-1219 failure (only Tray 2)
86
Tray 2 is not installed into the machine
1 T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB failure. 2 Harness connection failure of T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB. 3 Main PCB failure. 4 Connector 55533-1219 failure (only Tray 2)
88
Paper jam inside the machine
1 Harness connection failure of high voltage power supply PCB ASSY. 2 Registration rear actuator catching on some position. 3 Registration rear sensor failure. 4 Main PCB failure

Code
Description
Causes
89
Incorrect paper size in duplex printing
1 Registration rear sensor failure. 2 Main PCB failure
8A
Paper jam in Tray 1
1 Dirt on edge sensor. 2 Harness connection failure of high voltage power supply PCB ASSY. 3 Paper feeding kit worn out (MP/ T1/ T2). 4 Registration front sensor failure. 5 Main PCB failure
8B
Paper jam in Tray 2
1 Dirt on edge sensor. 2 Harness connection failure of high voltage power supply PCB ASSY. 3 Paper feeding kit worn out (MP/ T1/ T2). 4 Registration front sensor failure. 5 Main PCB failure
8C
Paper jam in MP Tray
1 Dirt on edge sensor. 2 Harness connection failure of high voltage power supply PCB ASSY. 3 Paper feeding kit worn out (MP/ T1/ T2). 4 Registration front sensor failure. 5 Main PCB failure
8D
Paper jam near eject tray
1 Duplex sensor failure. 2 Main PCB failure
99
Specified paper size is not supported for duplex printing (Duplex)
1 Main PCB failure
9F
Paper empty
1 Dirt on PE sensor. 2 Harness connection failure of PE EG sensor PCB ASSY. 3 PE actuator catching on some position. 4 PE sensor failure. 5 HVPS PCB unit failure. 6 Main PCB failure
A1
Front cover opened
1 Harness connection failure of front cover sensor ASSY. 2 Part pressing the front cover sensor ASSY is broken, which is provided at the left side of the front cover inside. 3 Front cover sensor failure. 4 Relay front PCB failure. 5 Main PCB failure
A2
During scanning, 90 cm or longer of a document is detected
1 Document rear actuator catching on some position. 2 Document rear sensor failure. 3 Main PCB failure
A3
Document rear sensor is not turned on when feeding the document
1 Document rear actuator catching on some position. 2 Document rear sensor failure. 3 Main PCB failure
A4
ADF cover opened
1 ADF cover open sensor arm catching on some position. 2 ADF cover is changed in shape or cracked.e position. 3 ADF cover open sensor failure. 4 ADF relay PCB failure. 5 Main PCB failure.
A5
Fax scanning error (Warning) (First time)
1 Scanning failure.
A6
Fax scanning error (Error) (Second time)
1 Document scanner unit failure. 2 Main PCB failure
A7
Scanning color parameter file failure
1 Scanner module failure. 2 Main PCB failure
A8
Scanning color parameter matching error
1 Scanner module failure. 2 Main PCB failure

Code
Description
Causes
AD
DMA transfer error
1 Scanner module failure. 2 Main PCB failure
AE
Document scanner home position sensor is not turned on.
- CCD model: 1 Home position sensor harness not connected correctly. 2 Drive PCB failure. 3 Belt broken. 4 Home position sensor failure. 5 Scanner motor failure. 6 Tab of CCD module broken. 7 Main PCB failure.
- CIS model: 1 FFC cable not connected correctly. 2 Drive PCB failurelure. 3 Document scanner unit failure. 4 Main PCB failure
AF
Document scanner home position sensor is not turned off.
- CCD model: 1 Home position sensor harness not connected correctly. 2 Drive PCB failureunit failure. 3 Belt broken. 4 Home position sensor failure. 5 Scanner motor failure failure. 6 Main PCB failure
- CIS model: 1 FFC cable not connected correctly. 2 Drive PCB failurelure failure. 3 Document scanner unit failure. 4 Main PCB failure
B0
Document scanner unit FFC detection error
1 Harness for scanner module not connected correctly. 2 Scanner harness broken. 3 Main PCB failure
B1
Dark level offset data level error for scanning
1 CCD unit failure. 2 Main PCB failure.
B2
Gain control data level error for scanning
1 CCD unit failure. 2 Main PCB failure.
B7
A/D converter standard voltage failure; at High side
1 CCD unit failure. 2 Main PCB failure.
B8
A/D converter standard voltage failure; at Low side
1 CCD unit failure. 2 Main PCB failure.
B9
Scanning light adjustment error is detected
1 Scanner module failure. 2 Main PCB failure
BB
White level data error
1 Scanner module failure. 2 Main PCB failure
BD
Black level data error
1 Scanner module failure. 2 Main PCB failure
BF
ADF duplex scanning cannot be implemented due to too long document
1 Document front actuator 2 not operating smoothly or catching in some position. 2 Document front sensor 2 failure.
C0
New toner detection lever failure
1 Power off or front cover opened while detecting a new toner cartridge. 2 New toner sensor failure.
C7
Insufficient DIMM Memory
1 Main PCB failure.
C8
Secure print data full
1 Main PCB failure.


Code
Description
Causes
C9
DIMM error
1 Main PCB failure.
CA
Excess current to USB device that is front side of the machine
1 Harness connection failure of USB host relay PCB ASSY. 2 USB host relay PCB failure. 3 Main PCB failure.
CD
Drum unit is not installed into the machine
1 Dirt on electrodes on drum unit and machine body. 2 HVPS PCB unit failure. 3 Main PCB failure
D1
Modem initialization failed
1 Main PCB failure
DD
Fuser error other than 58, 59, 68, 69, 6A, 6B, 6C, 6D, 6E, 6F, 76, 78, DE and E2 are occurred
1 Fuser unit failure. 2 Main PCB failure. 3 LVPS PCB failure.
DE
Central temperature of heat roller detected the temperature that was lower than 60°C)
1 Relay rear PCB ASSY connection failure. 2 Fuser unit failure. 3 Main PCB failure.
E0
Program error
1 Program failure. 2 Main PCB failure
E1
Main PCB failure
1 Main PCB failure
E2
Central temperature of heat roller exceeds 280°C
1 Fuser unit failure. 2 Main PCB failure
E6
EEPROM error
1 Main PCB failure
EB
The data reading error for E2PROM
1 Main PCB failure
EC
Fuser fan failure
1 Main fan failure. 2 Main PCB failure
ED
Wireless LAN connection failure between W-LAN PCB and access point
1 WLAN PCB failure. 2 Main PCB failure
EE
Wireless LAN is unable to communicate between W-LAN PCB and access point
1 WLAN PCB failure. 2 Main PCB failure
EF
LVPS PCB failure
1 LVPS PCB failure. 2 Main PCB failure.

Code
Description
Causes
F8
Battery connection error
1 Battery harness connection failure. 2 Main PCB failure. 3 Battery failure.
F9
EEPROM customizing code error
1 Turn the power off, when the Maintenance mode 74 PARAMETER INIT is in progress. 2 Main PCB failure
FF
Excess current to USB HOST PCB error
1 USB HOST PCB failure. 2 Main PCB failure
Brother Trouble Error Codes
DOWNLOAD SUMSUNG, LAPTOP DRIVERS.laptopdriver.com, download.com
Download Laptop,download drivers, download laptop Drivers,ALL LAPTOP DRIVER. DELL DRIVERS, HP DRIVERSTOSHIBA DRIVERSACER DRIVERS , LENOVO DRIVERS , SONY DRIVERS, SUMSUNG DRIVERS, ASUS DRIVERS,Acer Drivers, Mutoh Drivers,Apple Drivers,OCE Drivers, Download HP Drivers,Brother Drivers,OKI Drivers,Canon Drivers Olivetti Drivers,Duplo Drivers,Download DELL laptop DRIVERS,Panasonic Drivers,Encad-Kodak Drivers,DELL LAPTOP DRIVERSPrintronix Drivers,Epson Drivers,Download ASUS DRIVERSRicoh Drivers,HP Drivers,Riso Drivers,KIP Drivers,Konica Drivers,DOWNLOAD SONY LAPTOP DRIVERS ,Samsung Drivers,Konica-Minolta Drivers,Download Canon Drivers ,Sanyo Drivers,Kyocera-Mita Drivers,Sharp Drivers,Lexmark Drivers,Sony Laptop Drivers,LG Drivers,Star ,Download Sony Laptop Drivers,
Download SONY LAPTOP DRIVERS,
DELL DRIVERS,
Download DELL DRIVERS
download laptop Drivers
Drivers,Mimaki Drivers,Toshiba Drivers,Minolta Drivers,Various Drivers,Muratec Drivers,Zebra Drivers,
DOWNLOAD ASUS LAPTOP DRIVERS,
DOWNLOAD SUMSUNG LAPTOP DRIVERS,
DOWNLOAD DELL LAPTOP DRIVERS,
Download Canon Copy Machine Drivers 
Brother Trouble Error Codes

Download Service Manual,Error Codes,
Download Laptop,download drivers, download laptop Drivers,ALL LAPTOP DRIVER. DELL DRIVERS, HP DRIVERS, TOSHIBA DRIVERS, ACER DRIVERS , LENOVO DRIVERS , SONY DRIVERS, SUMSUNG DRIVERS, ASUS DRIVERS,Acer Drivers, Mutoh Drivers,Apple Drivers,OCE Drivers,Brother Drivers,OKI Drivers,Canon Drivers Olivetti Drivers,Duplo Drivers,Panasonic Drivers,Encad-Kodak Drivers,Printronix Drivers,Epson Drivers,Ricoh Drivers,HP Drivers,Riso Drivers,KIP Drivers,Konica Drivers,Samsung Drivers,Konica-Minolta Drivers,Sanyo Drivers,Kyocera-Mita Drivers,Sharp Drivers,Lexmark Drivers,Sony Drivers,LG Drivers,Star '


A Note S37SP Drivers for Windows XP & Vist,

Drivers,Mimaki Drivers,Toshiba Drivers,Minolta Drivers,Various Drivers,Muratec Drivers,Zebra Drivers

No comments:

Post a Comment